Edradour is the smallest distillery in Scotland - With three people to run the entire operation.
The manufacturing steps
The making process of whisky takes at least 3 years. If a grain (malted or not) spirit did not stay for at least 3 years in an oak cask, it does not deserve the name of whisky. Even worse, it does not have legally the right to be marketed under the name of whisky.
To deserve the name of Scotch, the whisky has to stay for this minimum of 3 years on the Scottish ground.
Generally, the whiskies marketed as single malt aged for a minimum of 8 to 10 years.
Whisky, just like any other alcohol, is the result of natural chemical alterations of sugar. To produce alcohol, we first need to produce sugar.
Sugar is potentially present in barley, which grows easily under the Scottish latitudes. Many alcohols are made from grapes, but the climate of Scotland is not suited for this kind of culture. But the manufacturing process remains very similar to the one used in production of alcohol based on other raw material.
Malting
Malt is the result of the malting process. The barley is made wet and spread on the malting floor to allow the germination process to start. A succession of chemical reactions change the starch contained in the barley in sugar. Later sugar will change into spirit.
The malting art consist of finding the right moment to stop the germination process: not too late but not too early.
According to the season, malting takes between 8 and 21 days. Constant attention has to be given to the process. Barley has to be turned over regularly to ensure a constant moisture and temperature and to control the germination of the barley grains.
The end of the germination is triggered by drying the germinating barley over a fire (kiln). This oven is often heated by peat. The smoke of the peat fire in the kiln is determining is the taste of many a whisky.
Germination is stopped by drying the grains above an oven (kiln). The kiln on the picture is the one of Laphroaig. A kiln was often fed with peat. It is the smoke of the peat fire which gives some whiskies their particular flavour.
The art of some distilleries is in the correct proportioning of peat used to dry the malt. Springbank for instance produces 3 different malts: Springbank, Longrow and Hazelburn (which will be available from 2006). One of the main differences between those 3 products is the proportion of peat used for drying the malt. There are also some other differences in the distillation process in the case of Springbank.Bruichladdich also produces 3 different whiskies with different peat levels: Bruichladdich, Port Charlotte and Octomore (the two latter's are recent productions, and will not be marketed before several years).
. Maltings
Economic reasons obliged most of the distilleries to abandon their malting floors during the 1960's Malting happens mainly at specialized plants, called maltings. This maltings produce malt according to the requirements of their clients. The same malting company produces thus several kinds of malt. There are however notable exceptions to that rule: Balvenie, Laphroaig, Highland Park, Bowmore are some of the distilleries which produce parts of their own malts. According to some sources, these distillery would produce about 30% of their needs. Springbank produces 100% of their malt.
Maltings can be independent, or belong to big concerns, owning their own distilleries, like Diageo. Diageo, who owns a great deal of the Scottish distilleries (see distillery owners) has created its own malting plants, to supply the distilleries of the group (like for instance the malting at Glen Ord) or for local distilleries, like the Port Ellen Maltings on Islay. 
The latter is the result of an agreement signed by all the Islay distilleries who oblige themselves to buy a certain amount of malt at the Port Ellen Maltings. This malting plant is in full expansion, just like the distilleries of the island, and is progressively occupying the territory of the (henceforth former) distillery of Port Ellen.
The maltings do not have the romantic aspect of (old) distilleries, with their pagoda roofs...Grinding
When the malt is dry, it is grinded to make a kind of coarse flour which will be used in the next operations. This flour is called grist. Malt grinding is done with a malt mill in the distillery itself.
Nearly all the distilleries use the same kind of mill, traditionally made in England, in Leeds, which is sometimes hard to accept for a real Scot.
Brewing
The grist will be mixed with hot water in the mash tun. Generally one volume of grist is mixed up with 4 volumes of water. In this operation, 3 successive waters are used, at a temperature between 63 and 95% A mash tun can contain up to 25000 litres and has a double bottom with thin perforations to let the wort (sugared liquid resulting of the brewing operation) flow out, retaining bigger parts which will be sold as cattle food. In order to facilitate the process, mash tun have rotating blades. The waste is called draff.
The first operation, taking about 1 hour, will change the starch in fermenting sugars. The mix of water and grist looks like a kind of traditional porridge.
This sugared juice is called wort. The remainders will be brewed 3 to 4 times, in order to get a maximum of wort.The quality of the wort is controlled by the excise men, because it determines the amount of spirit which will finally be produced. This is the base of the taxation of the distillery. .
The wash back
In order to start the fermentation of the wort, yeast is added. The action of the yeast on the sugar of the wort will produce alcohol and carbon dioxide. The wort starts bubbling, which will sometimes result in strong vibrations of the wash back, despite its impressive size. Traditional wash backs are made of Oregon pinewood or scottish larch. However, more and more stainless steel wash backs are used nowadays, because they are easier to maintain.
The result of the fermentation is the same in both kinds of wash backs. However, lots of distilleries pretend Oregon wood is much better, and even hi-tech distilleries like Caol Ila do not believe in stainless steel wash backs The picture above has been taken at the Glenkinchie distillery, while the stainless steel wash backs on the left belong to Laphroaig. The wash
As result of the fermentation of the wort, a kind of beer with a percentage of approximately 8%. Till now, there are no substantial differences in the process of making whisky, and the making of beer.From now the difference between the process will become obvious. Beer will be perfumed with hops, while whisky will be distilled without alterations.
Distillation
The distillation is the process used to separate alcohol from water and other substances contained in the wash. This is a classical operation, and it is the base of each spirit round the world. It is used in perfumery too. Distillation is made in stills. The principle is very easy: water evaporates at 100% while alcohol does from 80%. Alcohol will thus be transformed in vapour and raises into 
the still before water itself begins evaporating. Pot stills are used in Scotland.
The size of the stills is fixed by the law. This is due to historical reasons, related to excise rights.
Edradour has the smallest legal stills of Scotland. If the stills were a bit smaller, the distillery would lose its licence. Stills are in copper, because this material has a great influence on the physical process of separation of the waters and the spirits. The quality of the dram we will enjoy a few years later depends partially on the copper surface being in contact with the liquids during the distillation process. Other things are important, like the shape, the height, the length of the lyne arm are also very important in the making of the taste of the future whisky. If a distillery has to add or replace a still, it will always try to get a still with the same capacity and the same shape, in order to guarantee a constant quality to the whisky.
Because of the extreme diversity of the stills used throughout Scotland, it is not possible to display some pictures on this page. I created a special page with pictures of various stills from several Scottish distilleries. To get there, just click on the still icon on the left. By the way, this is a still of Glenfarclas distillery.
Traditionally, the stills were heated with coal or peat, depending on the areas and possibilities. Currently, nearly all of them are heated with vapour, because this method gives more control on the process.The fuel used to heat the vapour is generally petrol, but it can happen that coal is still used.
The huge quantity of heat produced by distilleries is sometimes recycled. For instance, the municipal swimming pool of Bowmore is warmed with recuperation heat from the distillery.
Scotch whisky is double distilled, with some exceptions to this rule, like Auchentoshan which is distilled three times, just like Irish whiskey.
The distillation process occurs in two stages in two still with different capacity and shape.
The first distillation occurs in the wash still whose capacity can be between 25 and 30.000 litres and transforms the wash in "low wine", at about 21 % of alcohol. If the stills were originally heated with a naked fire, generally from coal or gas, the current stills are heated by a serpentine within the still, where the vapour is circulating.
The alcohol vapours are cooled outside the still by condensers. The traditional condensers were serpentines immerged in a great open wooden back, containing cold water.
Currently, most of the distilleries use vertical tubular condensers, because the output is better. Waste of the first distillation is called "pot ale" or "burnt ale", and is transformed to feed cattle too.
The low wines resulting from this first distillation are kept in the "low wine receiver and will be used as ground for the second distillation.The second distillation occurs in a spirit still which is generally smaller than the wash still, as there is less liquid to process.
During the second distillation, only the "distillation heart", the part which has between 63 and 72% of alcohol will be casked. The heads and tails, also called feints, will go to the feint receiver, and reused mixed with the low wines of the next distillation.
To separate the feints from the distillation heart, a spirit safe is used. This spirit safe (was) used for the determination of the quantity of alcohol produced , to calculate the taxes due by the distillery
The distillation process is unique for each distillery using pot stills. (Distilleries using Lomond stills - there are very few of them left now - can produce several types of whisky.)
This means that all the whiskies produced by a certain distillery are treated on the same way, with the same malt, the same stills on the same way by the same people... So, why can they be so different from each other? The answer to this question is in the aging process, the casks used, the nature of the warehouse, the taste of the air (it seems that a whisky aged in casks stored in warehouses close to the sea have a different taste from a whisky aged on some other place). Glenmorangie Cellar 13 is a good example of that phenomenon.
If the surrounding air has a (little) influence on the taste of whisky, one must realize that many distilleries bring their casks to some central place near Edinburgh for their aging. It it not clear to me if the whiskies aged that way are marketed as single malt or if they will be used in blends.
In other words, the influence of the air on the taste of whisky; myth or reality?
There is one thing for sure however, and that is that the role of quality of the barley, the making process, and the nature and quality of the casks where it was aged is very important. According to some specialists, this could be good for 95% of the final quality of a malt whisky.To have the right to bear the name of whisky, a grain spirit (malted or not) must be aged at least for 3 years in a oak cask. Unlike Cognac which is stored in new casks, the Scottish always use second hand casks.
The kinds of casks
The oak casks are classified by capacity, and the following casks exist:
A gallon is 4.546 litres The capacity of the casks is approximated.
The information about the capacities of the various casks comes from the Campbeltown museum.
The picture has been taken in the yard of Old Pulteney. Casks on the foreground are "sherry butts"
The Scotch whisky industry uses mainly 3 kinds of casks:
the "barrel" : ±190 litres
the "hogshead" :± 250 litres
the"butt" : ± 500 litres
The shape of the casks is mainly due to historic reasons, related to storage problems on ships. Sherry was carried on Spanish gallions, and the slender shape of the butts was the best for storing on this kind of ships, while the Portuguese Port was stored in a more bulbous cask, which was easier to carry on Portuguese merchant ships.
The "finishes"
Often whisky is aged for a while in bourbon casks, and finishes his aging period in some kind of other cask, in order to give is some new fragrances, before bottling. Generally it stays for 6 to 12 months in another kind of cask. This explains the "wood finish" mention on some bottling's. For instance, the 18 yo Glenmorangie finishes its maturation in next casks, which is rather uncommon in Scotland.
A whisky cask is always a second hand cask. It generally contained bourbon (american whiskey made from corn - (maize). Sherry is also very popular in the whisky industry. Other casks are used too, like Port, Madeira and more rarely Claret (French red wine) or rum, etc... Glenmorangie is specialized in "wood finishes" and some of them are very expensive, probably because of the rarity of the casks.
However, there is a question about this wood finishes. If the aim is to give some new and pleasant fragrances to the whisky, everybody knows (at least in the whisky industry circles) that this method is used sometimes to hide some distillation errors. Often, the casks are warmed up before transferring the whisky, in order to accelerate the fragrance transfer. Such practices are not acceptable, because the consumer has no way to know about this.
Casks industry
A quick mental calculation ca make you feel dizzy. There are about 100 active distilleries all over Scotland. The average production of each of them is between 1.200.000 and 2.000.000 litres a year. To deserve the "Scotch label", whisky must stay at least 3 years on the Scottish territory in oak casks. Assuming that the annual production is about 150.000.000 litres, the absolute minimum of whisky stored in Scotland is 450.000.000 litres This only to guarantee the legal right to be called Scotch whisky. This is without taking in account the huge quantity of whiskies which are aging for 10 to 30 years...
On the other hand, the casks used for storing whisky are never new casks. It is thus very important to maintain the casks in good state. Some distilleries have their own cooperages (like Balvenie or Bruichladdich for instance), but most of them prefer outsourcing this to specialized companies. There are lots of cooperages in Scotland, and the most famous of them (because it is a first class tourist attraction) is the Speyside Cooperage, situated half way between the Glenfiddich distillery and the centre of Dufftown. This cooperage has about 300.000 casks in stock. All of them need reconditioning. There are about 20.000.000 cask all over Scotland. A cask can be (re)used for a maximum of about 60 years. The angels share
The advantage of oak for maturing alcohol is that it is not airtight. It lets surrounding air enter the cask (which explains the salted taste of a whisky aging near the sea), but is also lets evaporate the whisky it contains. It is generally admitted that between 1 en 2% a year evaporates this way. Evaporation can affect water contained in the cask, but also the alcohol itself, resulting in a diminution of the alcohol percentage. That is called "the angels share". However, this percentage is theoretical, because this could result in a strange situation, as old whiskies (30 years and more) would lose their right to be called whisky. Indeed, assuming a whisky has about 70% of alcohol when it leaves the spirit still, and loses about 1% of alcohol a year a 30 years old whisky would just have a percentage of 40%, which is the lowest limit for a whisky.
The angels share is indeed the part of alcohol which escapes to excise rights. Excise rights are calculated on the amount of alcohol coming out of the still (and not on the amount of water). As this amount is diminishing over the years, it would not be fear to tax the marketed whisky based on the alcohol percentage it had when it was distilled...
The nature of the warehouse is also very important. A damp cellar or a dry cellar will influence the evaporation of the spirit differently. In a dry cellar (with a concrete floor), water will evaporate mainly, letting a dryer whisky with a higher alcoholic percentage. In a damp warehouse (beaten-earth floor) the alcohol will evaporate, letting a rounder whisky, with a smoother taste.
Bottling
Bottling is the last step before putting the whisky on the market.
Unlike wine, whisky does not mature anymore in the bottle. So a 12 years old whisky stays a 12 years old even 12 years later, and does not become a 24 years old one....
When bottling, some residues are left in the whisky. The effect of this is that whisky looks "cloudy", and this is not always appreciated by the consumer. That's why distilleries found out the "chill filtering", which removes all this residues. The problem with chill filtering is that it also removes parts of the fragrances and of the taste.
With the current revival of single malt, more and more bottlers (in dependant or official) bottle their whiskies without chill filtering. And this makes single malt lovers very happy.
During bottling, the alcohol percentage is reduced. This is the other operation where the quality of water has a great influence on the taste of whisky. The minimum percentage of alcohol for whisky is 40%. Most of the bottles are marketed at this percentage, because the excise rights are calculated on the alcohol proportion in the bottle. The excise rights are particularly high in Great Britain, but in other countries they are lower. That's why on the international market, whiskies are frequently bottled at 43%.
For some technical reasons, the ideal percentage for bottling without chill filtering seems to be 46%. Most of the non chill filtered whiskies are marketed at 46%.
Often whisky is not diluted when bottled. That's called cask strength bottling.
Generally, the casks are mixed before bottling, to get a more standardized product, just like great wines. When the whisky comes from just one cask, it is called "single cask".
Most of the distilleries do not bottle their own whiskies, but let this happen at specialized plants. Exceptions among others are Glenfiddich, Springbank, Bruichladdich and Loch Lomond. Even if they do not bottle themselves, the responsibility of the bottling stays from the distillery. This is called "official bottling". This operation happens often in the suburbs of Edinburgh where several bottling plants are installed, belonging to distilleries (like Glenmorangie in Broxburn) or to independent bottlers, like Ian McLeod in the same town.Independent bottlers
A very interesting phenomenon in whisky world is the work done by independent bottlers. Unlike bottling plants who work on behalf of distilleries, the independent bottlers buy casks at one or more distilleries, choose the type of cask, and let it mature in own warehouses or in the distillery warehouse. The independent bottler decides when the whisky will be ready for selling. These bottlings are marketed under the name of the bottler, and sometimes the name of the distillery does even not appear on the bottle -rarely-. Some of these companies are Signatory, Ian MacLeod, Douglas Laing (Provenance and Old Malt Cask), Cadenhead, etc. .. Illustration of the whisky making process
This illustration is based on pictures of the scale model of an distillery displayed at the Glenkinchie distillery. Visiting this distillery is very interesting, especially because of the very nice distillation museum it hosts, and the pictures below represent the master piece of this museum.
| Barley reception at the distillery |
| |
| Kiln (oven) used to dry the malt. This image of the distillery makes the role of the pagoda roofs on (old) distilleries obvious. |
| After drying the malt, it goes through the malt mill to be transformed in a kind of coarse flour (like muesli) |
| After grinding, the malt is transferred in the mash tuns where it is mixed with hot water in order to extract the sugar. |
| The wort is then transferred in thewash backs, where yeast is added, to start the fermentation. |
| The fermented liquid is then distilled in the stills |
| The distilled alcohol is cooled in a condenser. |
| before being transferred in oak casks for a minimum of 3 years. |
The quality of the Whisky barrels is carefully monitored because the new spirit is to gain character and colour from the wood in which it rests.
Some casks will previously have been used to mature oloroso, fino or amontillado sherries; some will have contained bourbon and some will be oak.
The type of Whiskey barrel used for maturation will have been determined by the Master Blender who is seeking a particular character and continuity of the whiskey.
Only after a minimum of three years maturation can the new make spirit be legally defined as Scotch Whisky.
In practice, most Scotch Whisky matures for much longer - from five to fifteen, twenty, or twenty-five years and sometimes longer.
It is this lingering period during which Scotland’s cool, clean air steals through the porous oak of the casks and charms their contents, contributing further to the smooth and golden character of each distillery’s unique creation.
A proportion of the whiskey in each cask evaporates annually and is lost to the heavens. This is known as the "angels’ share".
One of the most frequently asked questions is “Why do whiskey makers use Oak Whiskey barrels?”
The reason that Oak is utilized is its unique physical and chemical nature. Oak has strength - physically, its wide radial rays give strength when shaped for a cask;
Oak is also a "pure wood" as opposed to pine or rubber trees which contain resin canals that can pass strong flavors to maturing whisky.
But it’s not just the Oak itself, it’s the transformation that happens to the Oak as a result of the seasoning and heating treatments during the coopering process - these result in the production of pleasant-tasting Oak lactones.
Whiskey barrels made from Oak have three broad effects on the spirit:
As an additive - It adds to the taste and aroma of the spirit by providing desirable elements from the cask. For example: vanillin, Oak lactone (coconut, bourbon character), toastiness, wood sugars and color.
As an agent that removes undesirable elements from new make spirit. For example: sulphur compounds and immaturity.
Oak barrels also interacts with the spirit. It adds extractive wood elements from the cask and converts them to organoleptically desirable elements.
For example it will change tannins to acetals, and change acetic acid to fruity esthers.
It has been said that there are 5 specific constituents of Oak and identifies how they influence maturing spirit:
Cellulose - Which has virtually no effect other than to hold the wood together.
Hemicellulose - Which consists of simple sugars that break down when heated and provide:
Body: through the addition of wood sugars
"Toasty & carmelised aromas & flavors"
Colour (unaged or "new make" whisky is a clear liquid)
Lignin - The binding agent that hold the cellulose in wood together which, when heated yield:
Sweet, smoky and spice aromas
Oak Tannins* - Which play an essential role in maturation by enabling oxidation and the creation of delicate fragrance in spirits. Tannins combine with oxygen and other compounds in the spirit to form acetals over time.
*Naturally occurring preservative compounds with a slightly puckery, astringent taste in the mouth, similar to the effect of strong black tea or fresh walnuts.
Oak Lactones - Resulting from lipids in the Oak, they increase dramatically during toasting and charring and can pass on a strong woody and perhaps coconut character; lactones give bourbon its distinctive character; and occur in higher concentrations in American Oak than in European varieties.
Will any Oak Whiskey barrel do?
Just three species of oak are used for wine and whisky barrel making or cooperage:
Quercus Alba, “White Oak” (America). Commonly referred to as “American Oak” and is the most commonly used variety in whisky cooperage.
More vanillin than European varieties Fast growth High in lactones, which when toasted, provide woody, vanilla, and coconut flavors
Quercus Petraea, “Sessile Oak” (Europe). Found across Europe, notably in France. Most commonly used for wine cooperage.
Slow growth, fine tannins and more vanilla (compared to Pedunculate)
Most common species in Tronçais forest
Quercus Robur, “Pedunculate Oak” (Europe). Found across Europe.
Spanish Oak generates more raisin, prune-like flavors.
Most commonly used for cognac and sherry cooperage.
Fast growth, more tannins, thus more oxidative characteristics in the matured products (compared to Sessile).
Most common species in Limousin forest
There are a number of other factors in how wood affects whisky. Chief among them are:
- Growth rate of the "donor trees";
- Method and length of time to dry the wood;
- Toasting and charring during cooperage.
Impact of Oak Growth Rate: Slower is Better
Winemakers are convinced of the relationship between Oak growth rates and the flavor and quality of their wines; while in whiskey, this factor is not widely considered.
It is known that slow growth Oak used in the making of whiskey barrels has more of the “good stuff” - especially vanillins and Oak lactones. White Oak is "fast-growth."
Once the wood is cut, the method used to season (dry) the wood has a huge impact. The wood MUST be dried before being used to make Whiskey barrels - the drying process converts chemical compounds in the wood to more desirable types.
How the wood is dried and for how long has a direct impact on the quality of the spirit.
It's accepted that air seasoning is better than kiln drying (it reduces tannic astringency as well as releases more vanillin), yet, while the barrels used to age wine may be made of staves which have been air dried for as much as 24 months - most bourbon whiskey barrels are made from wood which has been kiln dried in a matter of weeks.
Why? Some distillers think that the method for drying the wood is only important for the first-fill of a spirit aged in a new cask, (e.g., wine or bourbon) and has little or no impact when maturing spirits in previously used casks - and of course, Scotch is aged in previously used casks.
The application of heat is integral to the process of making the barrel - wood fibers behave much like plastic polymers - they want to be straight.
In order to bend the staves, they need to be heated. The straight staves are arranged inside a metal hoop and heated. I have heard that either an open flame or steam may be used. As they are heated they become more pliable and are shaped
- hoops of various diameters are added to each end - six in total
- which are hammered down, towards the middle. Each hoop is held in place by the pressure exerted by the staves as they try to straighten themselves. The whiskey barells are then toasted which caramelizes the wood sugars.
This is where the construction of bourbon whiskey barrels casks and sherry casks diverge.
The Whiskey barrels, once formed, are charred - the inside of the cask is set on fire for a short period of time, which creates a black charred layer.
There are various levels of charring which will have different affects on the spectrum of compounds and flavors the Oak will impart to the maturing spirit: more vanillins, lactones, "toastiness," spice characters, and tannins.
Charring casks causes further transformation. Char (carbon) removes sulphur compounds and immaturity from new spirit. Bourbon Whiskey barrels are typically charred for 40 seconds to 1 minute, but some distilleries have experimented with charring times of up to 3-4 minutes.
The result of charring is dramatic changes on the surface - for example,
wood sugars are caramelized, which will leech into the maturing spirit.
Sherry casks are only toasted and not charred. The casks used to mature Oloroso are the most popular with the Scotch industry.
Sherry casks can be made of American Oak, but this is usually for Fino Sherries and are generally not used by the Scotch industry.
It's accepted that European Oak adds more flavor thanAmerican Oak - sherry cask matured whiskies tend to be more full-bodied than bourbon Whiskey barrels matured ones, and this is likely the result of the type of wood, just as much as the type previous liquid occupant.
The wide-spread use of bourbon whiskey barrels is a fairly recent occurrence - a result of the difficulty in sourcing sherry casks during the Spanish civil war in the late 1930's.
Currently any where from 300,000 - 400,000 bourbon casks are acquired for use in the maturation of Scotch whisky - in contrast to only about 18,000 sherry casks.
Contrary to popular belief, very few whiskies are aged exclusively in bourbon barrels - most ex-bourbon aged malts are vatted with a (varying) percentage of whiskey which was aged in ex-sherry barrels.
Laphroaig, Glemorangie 10, Ardbeg 10, Glenlivet 12, are among those few "pure" ex-bourbon matured whiskies.
There are three Whiskey barrel sizes commonly used by the Scotch whisky industry:
Barrels - 190 liters/50 gallons
Hogsheads - 250 liters/66 gallons
Butts - 500 liters/132 gallons
Butts come from the sherry industry while the majority of Whiskey barrels and hogsheads originate in the bourbon industry. All things being equal, the larger the cask the slower the maturation.
Conversely, a smaller cask means that the maturing whisky is exposed to more wood and maturation is quicker - the Laphroaig quarter cask is an example of this.
Once a bourbon whiskey barrel has completed its "first life" that is, it has been used to age bourbon, it is ready for its second life as a whisky aging vessel.
It is broken back down into separate staves and shipped to Scotland. In Scotland, coopers reassemble the staves into casks which will be used to age the whiskey that you will enjoy in a few years. Some bourbon whiskey barrels and all sherry casks are generally shipped whole - not broken down into separate staves.
It's not common, but some companies re-char ex-bourbon whiskey barrels before use.
Casks may be used for as many as four fills, i.e., filled with four separate batches of new make spirit. Generally, though, casks are retired after their second, or third re-fills.
Sometimes when a whiskey barrel has reached the end of it's their useful life - after it has been filled and re-filled so many times that the spirit has taken out all the "good stuff" from the wood, some distillers will shave down the the inside of the cask to reach fresh wood and then the cask will be re-charred.
How ex-sherry casks are treated, once whiskey distillers get their hands on them, differs by distiller. Most will empty the cask of any residual sherry, nose the cask (to ensure the casks smells fresh, and then fill with new spirit.
Dave Robertson doesn't believe any one would char fresh sherry casks unless the sherry cask does not smell "right", in which case they might char, or may simply reject the cask.
Diogenes, the famous Greek philosopher, was reputed to have lived in a Whiskey barrel in Athens many years B.C. More likely it was a clay amphora of that time.
The Latin word cuparius is the root of our word cooper. The Romans had developed a high degree of technology in most things. Making barrels for storage of various goods, both dry and wet, is probably a skill they developed. However most archaeology indicates wine was stored and transported in clay amphorae.
Legend indicates that cooperage was a celtic invention. The vikings had developed the wood joint in boat making. The design of a barrel is on the double arch engineering principle, for strength. Being round it is also easy to move, and the chimb allows for lifting hooks.
Provisioning of ships for dry and wet goods seems to go hand in hand with whiskey barrels. The description "tonnage" refers to capacity, not weight.
Before Columbus chanced on America, there is no indication that barrels existed in either south or north America.
President Kennedy's great grandfather was an Irish cooper who emigrated to Boston during the potato famine. He became a publican.
The Virgin Mary was the Patron Saint of coopers in England until being dropped due to religious persecution in the 15th century.
Pinkerton, the famous detective, was a Glasgow cooper and Chartist who emigrated to America in 1850 on persecution grounds.
Whiskey, like many grain alcohols, may be made using an assortment of different grains. Common whiskey grains are rye, barley, corn, and wheat. Whiskey is sometimes referred to as the “juice of the barley”, an allusion to the grain used in creating that type of whiskey. Malt whiskey is a type of whiskey made entirely from malted barley as the source grain, and a single-malt whiskey is a whiskey in which all the malt comes from one stilling, rather than blending many different batches together. Bourbon is a type of whiskey in which more than half of the grain used is corn, and it is often treated as its own distinct alcohol. Bourbon is aged for at least two years in a white oak barrel to let it mature before being bottled. Usually, it is adjusted from its high alcohol content of around 160 proof down to between 80 and 100 proof before being sold, though some bourbon is sold at cask strength, in which case it remains at the proof it leaves the cask after aging, often as high as 120 proof. Irish whiskey is generally made from barley, either entirely from malted barley, in which case it is a single-malt whiskey, or from a blend of unmalted and malted barley, in which case it is known as pure pot still. Blended whiskeys from Ireland may also include corn or wheat alcohols mixed in with a blend of barley. Scotch whisky is often simply referred to as Scotch in the United States and elsewhere, or simply as whisky in Scotland. A single-malt Scotch is made entirely from malted barley from one distillery; a blended malt Scotch uses all malted barley, but may mix batches from different distilleries; a single grain Scotch uses alcohol all from one distillery, though it may blend different grains; and a blended grain Scotch may use multiple grains from multiple distilleries. Of these, the single-malt Scotch is usually hailed as being of the highest caliber, and as such is both the most expensive and the most sought after.
